The drive KINGSTON SA400S37240G has used more than half of its estimated lifespan, with 39% remaining. The drive is still operating normally, but it is entering a phase where the risk of failure increases progressively.
It is advisable to regularly monitor the S.M.A.R.T. status of this drive and keep your backups up to date.
We detected 1 storage device(s) that are not partitioned or formatted. The affected device(s) are: Sabrent Rocket Q. Windows cannot use these drives until they are initialized and set up.
Open the Disk Management tool to initialize the device(s), create a partition, and format the drive so it becomes usable.
The drive Sabrent Rocket Q has only 10% of its estimated lifespan remaining. At this stage, an imminent failure is possible at any time.
It is strongly recommended to back up your data immediately and plan a replacement for this drive as soon as possible.
Scan this QR code
To open this page on your phone
CPU clocks
Last sample and peak over the test, values in MHz
| Clock | Current | Peak |
|---|---|---|
| Cores | ||
| #0 | 4705.62 | 4730.57 |
| #1 | 4705.62 | 4731.10 |
| #2 | 4705.62 | 4731.44 |
| #3 | 4705.62 | 4706.00 |
| #4 | 4705.62 | 4706.00 |
| #5 | 4705.62 | 4706.00 |
| Uncore / BCLK | ||
| L3 Cache | 4731.02 | 4731.10 |
| CPU BCLK | 101.74 | 101.75 |
Previous validations from this PC
Unexpected crashes (BSOD)
No unexpected crashes (BSOD) recorded on this PC.
Boot Time details
Hardware errors (WHEA)
22 errors recorded in the Windows event log, showing the 10 most recent.
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Driver problems
No device needs attention, 1 more ignored.
Flagged processes
51 running processes, none flagged.
Inform a support service
If a partner support service is helping you with this PC, enter the service code they gave you to send them this validation. A valid service code is required.